Setting Flushing

Cleaning of the print head nozzle surface is performed by discharging ink from the print heads at the set interval. Performing ink discharge regularly can prevent ink dot displacement and dot drop-out.

Procedure
  1. Check that the home screen is displayed.
    If it is not displayed, press the [EXIT] button several times to display the home screen.
  2. Press the [ENTER] button.
    The "MENU" screen appears.
  3. Select "Setup Menu".
    Press the [FRONT] or [BACK] button to select.
  4. Press the [ENTER] button.
    The "Setup Menu" screen appears.
  5. Select "Auto Clean".
    Press the [FRONT] or [BACK] button to select.
  6. Press the [ENTER] button.
    The "Auto Clean" screen appears.
  7. Select "IDLE auto. flush".
    Press the [FRONT] or [BACK] button to select.
  8. Press the [ENTER] button.
    The "Auto Clean Set" screen appears.
  9. Set the interval for automatically discharging ink.

    Press the [FRONT] or [BACK] button and select the setting item, then press the [ENTER] button to confirm.

    Settings Description
    "Wait Time"

    Select the interval that you want to set from among the provided settings for the interval at which automatic ink discharge is performed.

    Press the [LEFT] or [RIGHT] button to change the display to OFF - 5 min - 10 min - 0.5H - 1H - 2H - 3H - other in sequence. When the interval to set is selected, press the [ENTER] button. The current setting is indicated by a black circle next to the time.

    When the interval is set with "Wait Time", "NULL" is displayed for "other".

    To perform automatic ink discharge at an interval other than the "Wait Time" selections, select other.
    "other"

    This setting is used to perform automatic ink discharge at an interval other than the "Wait Time" selections.

    Select other for "Wait Time".

    Press the [LEFT] or [RIGHT] button to increase or decrease in increments of 1 min. When the desired interval is selected, press the [ENTER] button. The interval can be set in the range of 1 min to 1440 min.
    "Flush Num"

    Set the number of times to discharge ink at automatic ink discharge.

    Press the [LEFT] or [RIGHT] button to increase or decrease in increments of 1. When the desired interval is selected, press the [ENTER] button. The interval can be set in the range of 5 to 254.

    A black circle is displayed on the right side of the selected setting.

  10. Press the [EXIT] button several times to return to the home screen.