Changing the Printing-start Location

With the printer initial settings, printing starts from the X-axis and Y-axis 0 position at the bottom right of the flat table. While it is possible to change the print data layout position to change the printing-start location, this section explains the procedure for changing the printing-start location by changing the printer settings.
Procedure
  1. Check that the home screen is displayed.
    If it is not displayed, press the [EXIT] button several times to display the home screen.
  2. Press the [ENTER] button.
    The "MENU" screen appears.
  3. Select "Auxiliary Func".
    Press the [FRONT] or [BACK] button to select.
  4. Press the [ENTER] button.
    The "Auxiliary Func" screen appears.
  5. Select "Carrier Start".
    Press the [FRONT] or [BACK] button to select.
  6. Press the [ENTER] button.
    The "Carrier Start" screen appears.
  7. Select either "Relative point" or "Offset settings".
  8. Press the [ENTER] button.
  9. Set the printing-start location.
    Settings Description
    "Relative point" The printing-start location moves from the print origin position by the amount of the offset values.

    Press the [LEFT] or [RIGHT] button to move the print-head carriage, and press the [FRONT] or [BACK] button to move the flat table. The offset values are displayed on the display screen.

    • "Xoffset"

      Press the [LEFT] or [RIGHT] button to move the print-head carriage and decide the amount of offset in the left-right direction.

    • "Yoffset"

      Press the [FRONT] or [BACK] button to move the flat table and decide the amount of offset in the forward-back direction.

    A location outside the printable area cannot be specified.
    "Offset settings" The printing-start location moves from the current printing-start location by the amount of the offset values.

    Press the [FRONT] or [BACK] button, and select the "Xoffset" or "Yoffset" menu item.

    Press the [LEFT] or [RIGHT] button to display the offset values on the display screen.

    • "Xoffset"

      Press the [LEFT] or [RIGHT] button to decide the amount of offset in the left-right direction.

    • "Yoffset"

      Press the [LEFT] or [RIGHT] button to decide the amount of offset in the forward-back direction.

    A location outside the printable area cannot be specified.
    When setting is completed, press [ENTER].
  10. Press the [EXIT] button several times to return to the original screen.