Configuring the Settings for Cleaning Before Printing Start

Set the frequency for performing cleaning before printing. The setting is the print count, and cleaning is performed each time the set count is reached. For example, if 3 is set, cleaning will be performed before printing every third printing.

To perform cleaning every time at each printing, set 1. To not perform cleaning before printing, set 0. This is effective in cases such as when ink mist is likely to occur or when performing continuous printing.

Procedure
  1. Check that the home screen is displayed.
    If it is not displayed, press the [EXIT] button several times to display the home screen.
  2. Press the [ENTER] button.
    The "MENU" screen appears.
  3. Select "Auxiliary Func".
    Press the [FRONT] or [BACK] button to select.
  4. Press the [ENTER] button.
    The "Auxiliary Func" screen appears.
  5. Select "Job start Clean".
    Press the [FRONT] or [BACK] button to select.
  6. Press the [ENTER] button.
    The "Job Clean" screen appears.
  7. Configure the setting for cleaning before printing starts.

    Press the [LEFT] or [RIGHT] button to set.

    Settings Description
    "Job Num"

    Set how many times to print before performing cleaning before printing starts.

    Press the [LEFT] or [RIGHT] button to increase or decrease in increments of 1. This can be set in the range of 0 to 100. When the desired count is selected, press the [ENTER] button.

    When 0 is set, cleaning is not performed before the start of printing.

    When 1 is set, cleaning is performed every time before the start of printing.

    A black circle is displayed on the right side of the selected setting.

  8. Press the [EXIT] button several times to return to the home screen.
    MEMO

    Default setting: 0