Jump to main content
Setup Guide
Introduction
Installation
Appendix
INDEX
Search
Home
Installation
1. Assembly and Ink Filling
Step 5: Installing the Dryer
Introduction
Installation
1. Assembly and Ink Filling
Checks before Operations
Step 1: Assembling the Stand
Step 2: Attaching the Printer Unit and the Stand
Step 3: Installing the Media Holders and Media Stays
Step 4: Assembling the Media Take-up Unit
Step 5: Installing the Dryer
1. Attach arm B.
2. Attach the extension apron and extension cover.
3. Install the dryer.
4. Connect the cables.
Step 6: Installing the Drain Bottle
Step 7: Removing the Retainers
Step 8: Installing the Print Heads
Step 9: Filling with Cleaning Liquid
Step 10: Preparing the Ink
Step 11: Connecting the Cables
Step 12: Initial Settings and Ink Filling
2. Network Settings
3. Adjustment
4. Downloading and Installing Software
Appendix
Step 5: Installing the Dryer
1. Attach arm B.
2. Attach the extension apron and extension cover.
3. Install the dryer.
4. Connect the cables.
Introduction
Installation
1. Assembly and Ink Filling
Checks before Operations
Step 1: Assembling the Stand
Step 2: Attaching the Printer Unit and the Stand
Step 3: Installing the Media Holders and Media Stays
Step 4: Assembling the Media Take-up Unit
Step 5: Installing the Dryer
1. Attach arm B.
2. Attach the extension apron and extension cover.
3. Install the dryer.
4. Connect the cables.
Step 6: Installing the Drain Bottle
Step 7: Removing the Retainers
Step 8: Installing the Print Heads
Step 9: Filling with Cleaning Liquid
Step 10: Preparing the Ink
Step 11: Connecting the Cables
Step 12: Initial Settings and Ink Filling
2. Network Settings
3. Adjustment
4. Downloading and Installing Software
Appendix
Feedback
Was this information helpful?
1
2
3
4
5
NO
YES
Any additional feedback to help us improve.
Feedback
Thank you
