Step 9: Filling with Cleaning Liquid

Items Used in this Procedure
  • Cleaning liquid bottle
IMPORTANT

  • Be sure to use cleaning liquid that has not expired.

  • Never, under any circumstances, use anything other than the specified type of cleaning liquid.

  • The cleaning liquid vaporizes. After filling the cleaning liquid tank with cleaning liquid, close the caps of the tank and the cleaning liquid bottle.

  • The cleaning liquid must be purchased separately. Contact your authorized Roland DG Corporation dealer or visit our website (http://www.rolanddg.com/).

Procedure
  1. Prepare the cleaning liquid bottle.
    IMPORTANT Insert the nozzle firmly into the mouth of the cleaning liquid bottle.

    AP-640_CleaningLiquid

  2. Pull the cleaning liquid tank out from the side of the printer.

    AP-640_PullOutCLtank

  3. Open the lid of the cleaning liquid tank, and then fill it with cleaning liquid to the "Full" line.
    IMPORTANT Do not fill past the "Full" line.

    AP-640_FillCLtotank

  4. Close the lid of the cleaning liquid tank, and then slowly return this tank to its position in the printer.
  5. Close the cap of the cleaning liquid bottle nozzle and the air hole.