Processing a Job by the RIP or Printing a Job Automatically

Sets the operation when print data is added to the job list.

Do Nothing is the default setting, but the amount of time required can be shortened by setting RIP Only or RIP and Print.

However, RIP and Print should be used with caution, as print data is printed using the Queue Properties settings.

Procedure
  1. Click VW7_Customize for the queue folder to configure settings.
    The Queue Properties window appears.
  2. Click VW7_JobManagement Job Management.
  3. From Action under Action for Incoming Jobs, select one of the following.
    RIP Only Processing by the RIP is automatically performed when a job is added to the job list.
    RIP and Print Both processing by the RIP and printing are automatically performed when a job is added to the job list. With this setting, you cannot specify the print count.
    MEMO Select the Auto Rotate to Save Media checkbox to reduce the amount of wasted media by automatically placing portrait images horizontally. This function operates independently from what is selected for Action. If you select this checkbox, jobs will be rotated and arranged on the media automatically even if Do Nothing is selected for Action.
  4. Set other items as necessary.
  5. Click OK.
    The Queue Properties window closes.
  6. Add the print data to the job list.
    The set process is performed automatically.