Setting Processing after Printing Is Completed

This section explains how to process a job after printing is completed.

  • Save Job

    Jobs will be saved after printing finishes.

  • Delete RIP Data

    All intermediate data such as the data processed by the RIP will be deleted, but the job will remain in the job list.

  • Delete Job

    Jobs will be deleted completely and will be deleted from the job list.

Procedure
  1. Click VW7_Customize for the queue folder to configure settings.
    The Queue Properties window appears.
  2. Click VW7_JobManagement Job Management.
  3. Select the processing method from Action After Printing under RIP and Print.
    Save Job*1

    The data processed by the RIP is kept, so you can print the job again without having to process it by the RIP. However, as more jobs are added to the job list, finding jobs involves more effort.
    Delete RIP Data

    To print the job again, you will have to process it by the RIP again.

    VersaWorks will have less data capacity than if Save Job is used, but the number of jobs in the job list will increase.
    Delete Job

    When the output is finished, the job is deleted and the queue folder is emptied. To print the job again, the print data must be saved separately.
    *1 Default value
  4. Click OK.
    The Queue Properties window closes.
    MEMO When you are changing the settings so that they are different for different jobs, you can add them to the job list and then change them in the Job Settings window.