Color Adjustment

Adjusts the level and tone of each color.

Item				Description	Refer to
Level Adjustment				Adjusts the color saturation and contrast of the entire image.	Adjusting the Color Saturation, Contrast, and Brightness of the Entire Image
	Set individual level			Select this check box to individually adjust the ink that was selected with Quality Settings - Mode. Default value: Selected
		All Colors		When the Set individual level check box is not selected, the level of all colors is adjusted.
		Contrast		Move the bar to the + (right) direction to increase and to the - (left) direction to decrease the contrast.
		Brightness		Move the bar to the + (right) direction to increase and to the - (left) direction to decrease the brightness.
		Reset ALL		Click this button to reset all the level adjustment parameters to their default values (0). You can check the adjusted image in the layout area preview.
	Edit Tone Curves			Use the tone curve to fine-tune the tone and color of the image. * A spot color is displayed according to the ink type. Default value: Apply to All Colors	Adjusting the Tone Curve
		Channel
			Apply to All Colors
			Cyan
			Magenta
			Yellow
			Black
		Show All Channels		Display channels other than the curve for the ink being adjusted. Use this as an aid when setting. Default value: Cleared
		Load…		You can open a tone curve where the settings were saved.
		Save…		You can assign a name and save a set tone curve. The file extension is .rcv.
Printer Color Match Settings				Adjusts output color variations that occur on the same printer or between multiple printers that are the same model.	Obtaining a Stable Output Color
	Perform Printer Color Matching			This is enabled when data is registered with [Printer Color Match Settings]. However because it depends on the print mode, data created for general use will not be displayed when other media is set.
		Reference Printer Data
			Color Settings
		Target Printer Data
			Color Settings

Feedback