Mark

Sets the details when marks and job information are added to and printed with the job.

Item Description Refer to
Marks Configures the crop mark, margin mark, and other settings.  
  Type Configures the settings for adding a variety of marks. Adding Trim Marks or Margin Marks
    No Marks Trim marks and margin marks are not printed.
    Trim Marks Prints trim marks added at the four corners of the job.
    Margin Marks Leaves margins around the job and prints the margin marks at the four corners of the margin.
    FOTOBA Cutline Marks Adds and prints specialized cutting marks when using Fotoba International S.R.L.'s finishing cutters.
  Crop Marks (Print&Cut Alignment) Specifies the crop mark setting range. However crop marks cannot be added when the image width is less than 60 mm (2.36 in.). Applying Crop Marks Individually to Multiple Images
    Entire Area Adds crop marks to the entire image. However the crop marks are automatically printed by the printer. Therefore the crop marks are not displayed in the preview.
    For Each Row Crop marks will be applied with the row of images treated as a single group.
    For Each Data Entry Crop marks will be applied to each individual image.
Job Property Label This is a method of printing information such as the print settings and the print date under the image. Printing the Job Properties
  Print Job Properties Turn this on to print the job information.
    File Name Prints the file name.
    Layout Prints the number of copies and scale.
    Quality Settings Prints the current quality settings.
    Color Settings Prints the details of the color settings.
    Printer Color Match Prints the color matching information.
    File Format Prints the settings of the spot colors and special colors (only when the conversion is enabled).
    Device Controls Prints the feed calibration (only when Use Printer Settings is not selected).
    Job Management Prints the job handling after printing.
    Clip and Tile Prints the location of the tile (clipped location and tile size for a clipped image).
    Spot Color Prints the generated pattern of the automatically generated plate, the plate density, and the corrected value.
    Date/Time Prints the date and time that the job was processed.
    Notes Prints the text entered in the input field.