Layout

Configures the settings related to the printing area and job layout. The items that can be selected vary depending on the model.

Item Description Refer to
Media Settings Sets the media size.  
  Size Selects the media type. Setting the Media Size
  Get Media Width Information about the printable area is acquired from the printer and W is set automatically. When the LEF series is used, W and H are set automatically.
  W W is set manually.
  H H is set manually. This can be set when sheet media is selected.
Scaling These settings are used for printing with the job enlarged or reduced. Scaling Jobs for Printing
  Scale Enlarges or reduces the job by the specified scaling factor.
  W Enlarges or reduces the job to the specified size. Entering one value will automatically set the other one. The horizontal to vertical ratio cannot be changed.
  H
  Fit to Media Size Automatically enlarges or reduces the job to match the paper size set in Media Settings. The scaling factor changes depending on the job orientation specified with Orientation under Media Settings. The horizontal to vertical ratio cannot be changed.
Position Sets the job printing position. Setting the Printing Position
  X The job is moved by the specified offset in relation to the upper-left corner (origin) of the media in the preview image (the lower-right corner of the set media). X sets the right distance and Y sets the downward distance.
  Y
  Center on the Media When using roll media, the job is moved to the horizontal center of the media. When using sheet media or standard-size media, the job is moved to the horizontal and vertical center of the media.
Print Quality Sets the number of copies to print, print spacing, image mirror, and printing direction.  
  Copy Sets the number of copies to print. Setting the Number of Copies to Print
  Page Range Specifies the page to print when printing print data that is composed of multiple pages.  
    from  
    to  
  Tile Spacing You can set the spacing between adjacent images when tiling and printing multiple images. Setting the Spacing between Adjacent Images
    Equal X and Y Spacing Specifies the spacing between adjacent images. The same value is specified for the vertical and horizontal spacings.
    Separate X and Y Spacing Specifies the spacing between adjacent images. Different values are specified for the vertical and horizontal spacings.
    Grid Spacing Specifies the value that is the addition of the image size and the spacing between adjacent images. The width and height values can be specified separately.
  Spacing Displayed when Equal X and Y Spacing is selected.
  X Displayed when Separate X and Y Spacing is selected.
  Y
  W Displayed when Grid Spacing is selected.
  H
  Mirror Reverses the image when printing. This is set in cases such as printing on transparent media when the image will be viewed from the opposite side of the printed surface. Mirroring the Image
  Orientation Specifies the direction of the printed image. Dark gray indicates a selectable direction, and the selected print direction is displayed in blue. Rotating the Image