Rotating the Image

Print the image rotated in 90° units. By printing a portrait image sideways, it is possible to reduce media use. However rotation is not possible in directions where the image exceeds the media size.

Because the size here varies depending on the print data, configure this for the job.

Procedure
  1. In the job list, double-click the job.
    The Job Settings window appears.
  2. Click .
  3. The direction for job printing can be selected from the following icons under Print Properties - Direction.
    Icon Direction
    Top
    Left
    Bottom
    Right
    MEMO

    It is not possible to change to horizontal orientation when Tile Spacing is Grid Spacing. Change [Tile Spacing] to Equal X and Y Spacing or Separate X and Y Spacing.

  4. Click OK to close the Job Settings window.
    The change will be applied.