Outputting

Procedure
  1. Correctly load the media in the machine, and then set cutting conditions that match the media.

    For details on how to load media and set the conditions, refer to the documentation for the machine you are using.

  2. Click tb_standard_send-to-device.

    The Send to Device dialog box appears.

  3. Select the machine where the data will be sent.

    If the machine you are using is not displayed, it has not been set in VersaWorks.

    For details on how to set the machine to output to, see the "VersaWorks Installation Guide."

    tut_5_device
  4. Click Send.