Jump to main content
User’s Manual
Basic Handling Methods
Output Method
Optimizing Quality and Efficiency
Maintenance
Troubleshooting Methods
Appendix
INDEX
Search
Home
Troubleshooting Methods
Cutting Problems
Crop Marks Are Not Detected
Is the material loaded correctly?
Basic Handling Methods
Output Method
Optimizing Quality and Efficiency
Maintenance
Troubleshooting Methods
Cutting Problems
Printing and Cutting Are Misaligned
Uncut Areas Remain or Cut Edges Are Not Clean
The Machine Cuts the Carrier Paper
The Machine Cuts the Same Area Twice
Crop Marks Are Not Detected
Is the material loaded correctly?
Are you using material that is not white or is glossy?
Are you using a transparent material?
Does the material have creases or wrinkles?
Are the crop marks blurred or are they in a color other than black?
Are the size and shape of crop marks correct?
Are the crop marks at the correct positions?
Is the "ROTATE" menu set to "90deg"?
Is the machine exposed to direct sunlight or strong indoor lighting?
Is the material loaded and set up straight and securely? Are the printing results crooked?
Do the distances between crop marks specified by the software match those specified on the machine? (Manual mode)
Is the printing expanded or reduced?
The Material Slips Away from the Pinch Rollers during Cutting
Machine Problems
Software Problems
Data Troubles
Messages on the Operation Panel
Appendix
Is the material loaded correctly?
Make sure that the material is loaded and set up correctly.
RELATED LINKS
Setting Up Material
Basic Handling Methods
Output Method
Optimizing Quality and Efficiency
Maintenance
Troubleshooting Methods
Cutting Problems
Printing and Cutting Are Misaligned
Uncut Areas Remain or Cut Edges Are Not Clean
The Machine Cuts the Carrier Paper
The Machine Cuts the Same Area Twice
Crop Marks Are Not Detected
Is the material loaded correctly?
Are you using material that is not white or is glossy?
Are you using a transparent material?
Does the material have creases or wrinkles?
Are the crop marks blurred or are they in a color other than black?
Are the size and shape of crop marks correct?
Are the crop marks at the correct positions?
Is the "ROTATE" menu set to "90deg"?
Is the machine exposed to direct sunlight or strong indoor lighting?
Is the material loaded and set up straight and securely? Are the printing results crooked?
Do the distances between crop marks specified by the software match those specified on the machine? (Manual mode)
Is the printing expanded or reduced?
The Material Slips Away from the Pinch Rollers during Cutting
Machine Problems
Software Problems
Data Troubles
Messages on the Operation Panel
Appendix
Feedback
Was this information helpful?
1
2
3
4
5
NO
YES
Any additional feedback to help us improve.
Feedback
Thank you
