2. Attach the automatic correction jig.

Procedure
  1. With its adapter ID facing you, insert the automatic correction jig into the clamp.

    Gently push in the automatic correction jig all the way along the groove in the clamp.

    Inserting it with too much force will make the automatic correction jig strike the inside of the machine, possibly leading to injury and jig damage.

    DWX-53DC_Adapter_Insert
  2. Secure the automatic correction jig.

    Close the fixing knobs (in two locations) in the directions of the arrows while pressing the automatic correction jig into the clamp to secure the automatic correction jig.

    DWX-53D_clamp_close
  3. Lightly tug on the automatic correction jig to check that it does not come loose.
  4. Close the front cover.

    Gently pull up on the front cover and then lower it until a click is heard.

    DWX-53DC_Cover_Close