Performing Spindle Run-in

Perform spindle run-in to apply grease to the sliding parts in the spindle, stabilizing its rotation.
Procedure
  1. Close the front cover.

    Gently pull up on the front cover and then lower it until a click is heard.

    DWX-53DC_Cover_Close
  2. Show VPanel.
  3. Click Icon_VPanel_MachineSetting.
    SettingsTab

    The Machine settings - DWX-53D window will appear.

  4. On the Maintenance tab, click Spindle run-in.
    Spindle_maintenance
  5. When the window in the following figure is displayed, click OK.

    Start spindle run-in.

    VPanel_Dialog_SpinleRun-in

    When a message indicating that work is complete appears, the spindle run-in is complete.