Step 2: Attaching the Adapter to the Machine
Procedure
-
Turn on the machine.
The machine starts the initial operations. When the status light stops flashing and remains steadily lit, initialization is complete.
-
When the initial operation is finished, open the adapter area cover.
-
With its adapter ID facing you, slowly insert the adapter into the adapter stocker.
IMPORTANT
Inserting it with too much force will make the adapter strike the inside of the machine, possibly leading to injury and workpiece damage.
MEMOTo check whether the adapter has been attached correctly, gently pull the adapter toward you.
It has been attached correctly if the protrusions on the adapter stocker catch on the grooves on the adapter.
- Close the adapter area cover.