Displaying the Thickness of the Remaining Cutting

Simulation2

When the toolpath calculation is finished, DGSHAPE CAM displays the material that may remain according to the dental prosthesis and the cutting option selected during the cutting start step.

This remaining amount is displayed directly on the dental prosthesis and is grouped by color according to the thickness of the remaining cutting. For example, assume there is a thin, deep internal structure that cannot be reached with a 1 mm (0.04 in.) cutting bur, as shown in the following image. This function is useful in enabling appropriate cutting of narrow areas like this in situations where jobs including 0.3 mm (0.01 in.) cutting burs are recalculated.
Simulation4
With this simulation tool, you can switch the display to the following modes.
  • Remaining cutting only
    OnlyResidual
  • STL only
    STLOnly
  • Remaining cutting and STL
    ResidualSTL
Simulation5