Types and Timing of Maintenance

To use this machine under its optimal conditions, it is important to perform the appropriate maintenance at the appropriate times.

Regular Maintenance

These are the maintenance items that are required on a daily basis.

Timing Category Item
Before daily operations Mixing the white ink Maintenance of Ink Cartridges (White Ink Only)
Cleaning the nozzle surface Start-up Cleaning
Print head check Print Head Check before Printing
After daily operations Cleaning the machine Cleaning the Machine
Cleaning around the print heads Daily Shut-down Cleaning
If the discharged fluid disposal message appears Disposing of discharged fluid Disposing of Discharged Fluid

Advanced Maintenance

Maintenance that is performed in an emergency. Some of this maintenance consumes a large amount of ink, so thoroughly read the explanation, and then perform the operation at the appropriate point in time.

Timing Category Item
If colors are uneven Ink mixing, ink circulation (white ink only), and ink replacement Did you shake the ink cartridges before installing them?
When dot drop-out or dot displacement occurs Checking and cleaning the print heads Step 1: Performing a Nozzle Drop-out Test
Step 2: Normal Cleaning Method
Medium Cleaning
Powerful Cleaning
Start-up Cleaning

Replacing Consumable Parts

These items are for replacement of consumable parts. Thoroughly read the explanation, and then perform the operation at the appropriate point in time.

Timing Category Item
When a message appears Replacing the wiper Replacing the Wiper
Replacing the felt wiper Replacing the Felt Wiper
Replacing the wiper pad Replacing the Wiper Pad
Replacing the cap top Replacing the Cap Top
When a cutting edge becomes dull Replacing the blade Replacing the Blade
Replacing the Separating Knife Replacing the Separating Knife