Cleaning the Machine

CAUTION

Before attempting cleaning, switch off the sub power and wait until the platen and dryer cool (approximately 30 minutes).

Sudden movement of the machine may cause injury, or hot components may cause burns.

WARNING

Never use gasoline, alcohol, thinner, or any other flammable material.

Doing so may cause a fire.

Wipe away any ink or grime on the media path and other areas as part of the daily cleaning procedure. Pinch rollers, grit rollers, the platen, and the apron are particularly prone to the buildup of grime. Wipe away any buildup of ink or grime on the media path. Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.

MEMO
  • This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
  • Never attempt to oil or lubricate the machine.

BN-20A_Cleaning

Grit roller Remove buildup of media scraps and other material using a brush. Never use a metal brush.
Pinch roller Periodically wipe away any grime. Failure to clean this part properly may result in the transfer of grime to the surface of media.
Platen Wipe away any buildup of ink or grime on the media path.
Apron