Jump to main content
User's Manual
User's Manual
  • Basic Handling Methods
  • Output Method
  • Optimizing Quality and Efficiency
  • Maintenance
  • Troubleshooting Methods
  • Appendix
INDEX
INDEX
  1. Home
  2. Maintenance
  3. Regular Maintenance
  4. Print Head Check before Printing
  • Basic Handling Methods
  • Output Method
  • Optimizing Quality and Efficiency
  • Maintenance
    • Introduction
    • Regular Maintenance
      • Maintenance of Ink Cartridges (White Ink Only)
      • Start-up Cleaning
      • Print Head Check before Printing
      • Cleaning the Machine
      • Daily Shut-down Cleaning
      • Disposing of Discharged Fluid
      • About Care and Maintenance of the Print Heads
    • Advanced Maintenance
    • Replacing Consumable Parts
  • Troubleshooting Methods
  • Appendix

Print Head Check before Printing

Do a nozzle drop-out test before printing, and if dot drop-out or dot displacement is present, perform cleaning.

In addition, each day before printing, be sure to carry out the following operations.

  • White ink mixing: Maintenance of Ink Cartridges (White Ink Only)
  • Start-up cleaning: Start-up Cleaning

For information on how to perform a nozzle drop-out test, refer to Step 1: Performing a Nozzle Drop-out Test.

  • Basic Handling Methods
  • Output Method
  • Optimizing Quality and Efficiency
  • Maintenance
    • Introduction
    • Regular Maintenance
      • Maintenance of Ink Cartridges (White Ink Only)
      • Start-up Cleaning
      • Print Head Check before Printing
      • Cleaning the Machine
      • Daily Shut-down Cleaning
      • Disposing of Discharged Fluid
      • About Care and Maintenance of the Print Heads
    • Advanced Maintenance
    • Replacing Consumable Parts
  • Troubleshooting Methods
  • Appendix

Feedback

1 2 3 4 5
NO YES

Feedback

Thank you

BY-20/R6-250723

Copyright © 2024 - 2025 Roland DG Corporation  
https://www.rolanddg.com/

User's Manual