Step 3: Filling the Ink Path with Ink

IMPORTANT
Be gentle when opening and closing the front cover and right cover. If you open and close them forcefully or release the cover when it is partly open, not only may it malfunction, but you may also be injured. When opening or closing the front cover, hold the cover in the center.
CoverCaution
Procedure
  1. Make sure the home screen is displayed.
    If the home screen is not displayed, press the [EXIT] button several times to display the home screen.
  2. Prepare to fill the ink path with ink.
    1. Press the [ENTER] button.
    2. Press the [FRONT] or [BACK] button to select "Maintenance".
    3. Press the [ENTER] button.
    4. Press the [FRONT] or [BACK] button to select "Manual Pump".
  3. Open the front cover.
  4. Press the [ENTER] button.
  5. Open the right cover.

    Ink suction starts, and the suctioned ink is discharged into the drain bottle.

    MEMO

    If the operation ends without ink being discharged, press the [ENTER] button again to suction ink.

    INKSuction
  6. After the suctioned ink is discharged into the drain bottle, close the right cover.
  7. Press the [EXIT] button.
    Ink suctioning will stop.
  8. Press the [EXIT] button multiple times.
    You are returned to the home screen.
  9. Press the [CLEAN] button.
    Normal cleaning starts.
  10. When normal cleaning finishes, press the [CLEAN] button again.
    Normal cleaning is performed for a second time.
  11. Close the front cover.