Nozzle Drop-out Test

Perform a nozzle drop-out test to ensure no dot drop-out or dot displacement occurs. If dot drop-out or dot displacement occurs, clean the print heads.

Procedure
  1. Click Output under Nozzle Drop-out Test.
    Printing of the test pattern starts.
    BD-8_Initial_nozzle
  2. Check whether there is dot drop-out or dot displacement in the test pattern.
    BD-8_TestPrint_Normal
    Missing blocks indicate dot drop-out. Collapsed or inclined blocks indicate dot displacement.
    • If there is no dot drop-out or dot displacement, click OK.
    • If dot drop-out or dot displacement is present, perform cleaning.
    Fixing Dot Drop-out and Dot Displacement
  3. Click OK.