Step 1: Starting the Printer and Utility

Procedure
  1. Close the front cover.
  2. Turn on the main power switch.
    BD-8_MainPower
    IMPORTANT Always keep the main power switched on.

    Never switch off the main power. Leaving the main power enables automatic maintenance to be carried out periodically. If the automatic maintenance is not carried out, it may result in the breakdown of this machine, such as the breakdown of the print heads.

  3. Press the sub power button.
    BD-8_SubPowerON

    The sub power is switched on. When the sub power button indicator changes from flashing blue to a steady blue color, the flat table has stopped and startup is finished.

    MEMO If the main power is off, turn the main power on to start firmware initialization. There will be no response when pressing the sub power button until initialization is complete. In this case, wait some time before pressing the sub power button.
  4. Start Utility from the Roland DG Connect Hub home screen.

    Click Open next to Utility.

    BD-8_Utility_Open

    Next, we will fill the machine with ink.

    Initial Ink Filling