5. Configure settings to match the media.

To ensure the optimal output according to the media size and type, you can set the minimal amount of items. All items set here can be set individually as well.

Procedure

Adjust the print head height using Print Head Height.
- If this is not necessary, tap Next.
- Follow the procedure below to make adjustments.
  1. Tap Change
  2. Open the front cover.
  3. Move the height-adjustment lever to adjust the head height.
  4. Close the front cover.
  5. Tap OK.
  6. Tap Next.
  For details on this work, refer to Changing the Print Head Height.
On the Nozzle Drop-out Test screen, configure the Printing Test or Printing Test (Drying Enabled) and Output Start Location settings.
- If this is not necessary, tap Next.
- To perform a Printing Test, tap Printing Test - Execute or Printing Test (Drying Enabled) - Execute.
  MEMO Printing Test is recommended. However, the ink will not dry, so if you want to dry the ink, select Printing Test (Drying Enabled).
For details on what to do after the printing test, refer to Step 2: Performing Normal Cleaning.
On the Select Media Adjustment Method screen, select the adjustment method.
Here, the media feed correction for reducing horizontal bands and the correction of the landing position of the ink will be adjusted. Select manual adjustment for transparent media and media with high reflectance, whose edges cannot be detected.
MEMO Simple Correction (Auto) is the recommended adjustment. You can determine the correction values with Detailed Correction (Manual).
- Follow the procedure below to make automatic adjustments.
  1. Tap Simple Correction (Auto) - Next.
  2. Tap Execute on the Batch Automatic Correction screen.
  On successful completion of automatic adjustment, the home screen appears. This completes the settings.
  For more information, refer to Automatically Making Required Adjustments.
- Follow the procedure below to make manual adjustments.
  1. Tap Detailed Correction (Manual) - Next.
  2. Perform a printing test on the Detailed Feed Correction (Manual) screen.
    Set the correction value from the printing test result. For more information, refer to Manual Adjustment: Reducing Horizontal Bands (Feed Correction).
  3. Tap Save and Proceed.
  4. Perform a printing test on the Detailed Media Gap Adjustment (Manual) screen.
    Set the correction value from the printing test result. For more information, refer to Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjustment).
  5. Tap Save and Exit.

This completes the setup of the media.

5. Configure settings to match the media.

Feedback

Feedback