Step 5: Configuring Media Sticking Prevention Settings

This setting is used to peel off the media before starting printing when using media that sticks easily to the platen. This setting is effective to prevent media jams.

Note, however, that peeling off the media may cause unstable media feed. Leave this menu item set to Disable unless you specifically need to change it.

Procedure
  1. Select Enable.
  2. Tap Save and Proceed.
    MEMO

    • Default setting: Disable

    • Depending on the software RIP you are using, you can also make this setting in the software RIP. When you have made the setting in the software RIP, the machine's setting is ignored.