Step 4: Setting the Media Suction Force

The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding to the nature and condition of the media.
Procedure
  1. Tap AP-640_Panel_Icon_MINUS or AP-640_Panel_Icon_PLUS to change the value.
    0 to 100% When the media is flimsy and cannot move smoothly, such as with thin films, decreasing this value (reducing the suction force) may correct the problem.
    Auto The suction force is automatically adjusted to the optimal level for the media width
  2. Tap Save and Proceed.
    MEMO

    • Default setting: Auto

    • Depending on the software RIP you are using, you can also make this setting in the software RIP. When you have made the setting in the software RIP, the machine's setting is ignored.