Correcting the Size of Spot Color Plates

Correct the size of an image printed using spot color ink.

Depending on the printer, this function may not be displayed.

Procedure
  1. Open Job Settings for the job with the misaligned spot color plate.
    • Double-click the job to set.
    • Right-click on the job to set, then click Edit Design - Job Settings .
    • With a job selected, click VW7_JobMenu1 on the left side of the job tool area, and then click VW7_CustomizeJob Settings .
  2. Click VW7-ICON_Quality Quality.
  3. Use Mode under Quality Settings to select the mode including the spot color.
  4. Use Special Color under Special Color Plate Correction to select the spot color to correct.
  5. Click Test Print under Size Correction.
  6. Select Pattern Settings.

    The stages consist of simplified stages that are coarse with units of 5, and detail stages that are fine with units of 1. The following test patterns are expressed using a blue spot color.

    • Simple (5)
      Select this when size difference is large (when making rough adjustments to the size).
      TestPattern-Simple_SIZE
    • Detailed (1)
      Select this when size difference is small (when making fine adjustments to the size).
      TestPattern-Detailed_SIZE
  7. Click OK.
    A test pattern is printed.
  8. Enter the correction value in Size Correction.
    Select the value on the printed test pattern that makes the size difference between the black frame and the spot color frame the smallest. Enter the Size Correction value written on the test pattern.
    TestPattern-Simple_SIZE-Sample
    IMPORTANT The test pattern correction values differ for each job. Set the default values for each job.
  9. Click OK.
    You are returned to the main window.