When Printing Align for Visualization Charts

Procedure
  1. View the nearest colors chart on each tab to check whether it contains the desired color.
    If it does not, change the settings, and then print the chart again. You can also select a swatch and click Print Chart Again to print the chart centered on that swatch.
  2. In the Nearest Color Finder window, select the desired color.
    To do so, select the number on the chart with Swatch Number or select the swatch with the corresponding number on the chart window.
  3. Click Save to Library.
    The selected color is applied to the selected spot color on the tab in the Start Nearest Color Finder window. However, it will not be applied to jobs with a different Quality setting.
  4. Specify the color on all tabs.
  5. To close the Nearest Color Finder window, click Exit.
This completes the nearest color finder settings. Output a job and check that the set spot color is output as intended.