Step 12: Setting the Ink Drying Time

This setting is used to extend the drying time when the ink dries poorly even if the dryer is used.
Procedure
  1. Tap Panel_Icon_Minus or Panel_Icon_Plus to change the value.
    Larger values cause the media to move more slowly, extending the drying time accordingly.
  2. Tap Save and Proceed.
    MEMO

    • Default setting: Off

    • Depending on the RIP software you are using, you can also configure this setting in the RIP software. If you have configured the setting in the RIP software, the printer's setting is ignored.