Step 4: Setting the Media Suction Force

The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding to the nature and condition of the media.
Procedure
  1. Tap Panel_Icon_Minus or Panel_Icon_Plus to change the value.
    0 to 100% When the media is flimsy and cannot move smoothly, such as with thin films, decreasing this value (reducing the suction force) may correct the problem.
    Auto The suction force is automatically adjusted to the optimal level for the media width.
  2. Tap Save and Proceed.
    MEMO

    • Default setting: Auto

    • Depending on the RIP software you are using, you can also configure this setting in the RIP software. When you have configured the setting in the RIP software, the machine's setting is ignored.