Menu List

Tap Menu_Panel to display the list of operations.

MEMO Media Settings only appears when media has been set up. When Menu operation in progress: Press [Home] to enable output. is displayed in the status bar, the display will automatically return to the home screen after 5 minutes.
Level 1 Level 2 Level 3 Level 4 Details
Job Management Direct Printing

Perform VersaWorks and Queue Folder via Roland DG Connect Hub, and then output the job.
Printing Log Displays the job Printing Log.

The Job Properties and for each job, and the Total Time and Total Area for all jobs, can be checked.
Media Settings*1 List of Media Settings Lists the settings of the media that has been set up. Tap a setting to move to a screen for changing this setting.
Printing Settings Print Head Height Checks/changes the print head height.
Batch Automatic Correction Adjustments are performed in the following order: Multi Sensor Adjustment, Feed Correction, then Media Gap Adjustment.
Feed Correction Simple Correction (Auto) Adjusts the media feed amount during printing. With Simple Correction (Auto), a printed test pattern is read with a sensor to automatically set correction values.
Detailed Correction (Manual) Adjusts the media feed amount during printing. With Detailed Correction (Manual), the printed test pattern must be checked visually and the correction values entered manually.
Media Gap Adjustment Simple Correction (Auto) Corrects the ink landing position. With Simple Correction (Auto), a printed test pattern is read with a sensor to automatically set correction values.
Detailed Correction (Manual) Corrects the ink landing position. With Detailed Correction (Manual), the printed test pattern must be checked visually and the correction values entered manually.
Cutting Settings Blade Adjustment Sets cutting conditions such as Blade Force and Cutting Speed.
Print & Cut Position Adjustment Corrects misalignment in the printing position and the cutting position during printing and cutting.
Crop Cut Position Adjustment Corrects misalignment in the crop mark positions and the cutting position when cutting with crop marks.
Cutting Distance Correction Corrects misalignment in the cutting line length due to changes in the media movement distance.
Over Cut Cutting the corners of the border of the cutting line slightly longer makes it possible to cut the corners attractively.
Heater Settings Heater Temperature Heater Power Switches the print heater and dryer on/off together. Switch these off in situations such as cutting that does not require the media heating system.
Print Heater Switches the print heater on/off and changes the set temperature.
Dryer Switches the dryer on/off and changes the set temperature.
Dry After Printing Sets whether to send printed media to the dryer and what drying settings to use. The drying time can also be set.
Other Media Settings Multi Sensor Adjustment Optimizes the status of the multi sensor used when reading the media width and with the automatic correction function.
Drying Time Per Scan Sets the drying time per scan operation of the print-head carriage.
Media Suction Force Adjusts the media suction force to prevent the media from coming loose or sticking.
Printing Movement Range Sets the print head carriage movement range during printing.
Media Sticking Prevention Performs media peel-off before printing.
Middle Pinch Auto Raise/Lower The middle pinch rollers go up automatically during pullback printing or printing and cutting.
Batch Media Settings The minimum settings required for media setup can be configured by following the on-screen instructions on the operation panel.
Media Management Displays a list of registered media. Up to 50 media names can be saved, and the following operations on media settings are possible.
  • Checking setting details in a list
  • Changing media names
  • Copying media settings
  • Duplicate as Media for Cutting
  • Deleting media settings
Cleaning Printing Test Before printing, use Nozzle Drop-out Test to check whether ink is discharged from the print heads correctly. If dot drop-out is present, perform cleaning appropriate for the severity of the drop-out. If faulty ink discharge cannot be improved, the problematic nozzle can be identified with Nozzle Mask Test, making it possible to stop using this nozzle.
Normal Cleaning If dot drop-out or dot displacement occurs, clean the print heads. If the problem cannot be fixed, perform more powerful cleaning.

If the media has already been set up, the After cleaning, perform a printing test. menu appears. When this is turned on, a printing test is performed after cleaning.
Medium Cleaning
Powerful Cleaning
Manual Cleaning Use cleaning liquid and a cleaning stick to clean the area around the print heads.
Maintenance Wiper Replacement Replace the wipers.
Blade Replacement Replaces the blade used in cutting.
Separating Knife Replacement Replaces the separating knife used in media separation.
Cap Replacement Replaces the print head caps, which are used to protect the print heads from drying out and from dust.
Wiper Cleaner Replacement Replaces the wiper cleaner used to wipe away dirt from the wiper.
Flushing Sponge Replacement Replaces the flushing sponge used to absorb the ink discharged (flushed) to prevent clogging.
Ink Renewal
Perform this operation when ink discharge issues are not resolved after performing the work below.
  • Normal Cleaning
  • Medium Cleaning
  • Powerful Cleaning
  • Manual Cleaning
Perform this operation when uneven color issues (except for white ink) are not resolved after performing the work below.
  • Ink mixing
  • Light Choke Cleaning
Perform this operation when uneven color issues (white ink) are not resolved after performing the work below.
  • Ink mixing
  • Ink Circulation
  • Light Choke Cleaning

However, this operation consumes a large amount of ink and may damage the print heads, so do not perform it more than necessary.
Ink Circulation*2

If white ink uneven color is not resolved even after mixing the ink, circulate the ink.

If the media has already been set up, the After cleaning, perform a printing test. menu appears. When this is turned on, a printing test is performed after Ink Circulation.
Light Choke Cleaning
Perform this operation when uneven color issues (except for white ink) are not resolved after performing the work below.
  • Ink mixing
Perform this operation when uneven color issues (white ink) are not resolved after performing the work below.
  • Ink mixing
  • Ink Circulation

However, this operation consumes a large amount of ink and may damage the print heads, so do not perform it more than necessary.
Drain Bottle Use this menu to discard discharged fluid at any desired time, regardless of any notifications or errors.
Automatic Maintenance Set the maintenance items that are performed automatically and the Type and Frequency according to the printer service environment, types of products that are frequently output, and other factors. A maximum of five settings for automatic maintenance can be saved.
Preferences Media Edge Detection Sets whether to detect the leading and trailing edges of the media. When using transparent media, whose edges cannot be detected, the media can be set up without detecting the edges by selecting Disable.
Take-up Sets the Take-up during Cutting, Take-up Method, and Take-up Direction for the take-up unit.
Remaining Media Management Sets the amount of remaining media that has been set up and displays this amount. This amount can also be printed on the media.
Extended Dryer These settings are required when using an auxiliary drying unit. Set them individually to Enable and Disable.
Blower Fan
Skewing Correction Support at Setup Sets whether to use sound and suction fans to assist in the setup process so that the media is not installed at an angle to the feed direction. When using transparent media or other media that the sensor does not work on, set to Disable.
Printing Test Position Sets the direction for test pattern printing: Feed or Scan.
Perforated Sheet Cutting Sets the perforated sheet cutting conditions.
Standby Heater Temperature Standby Heater Temperature Sets the heater temperature when media has not been set up.
Startup Heater Temperature Sets the warmup heater temperature if the temperature is low at startup.
Prefeeding at Output Determines whether to advance the media before output so that when the printer pulls out the media such as for cutting, the media will not be pulled forcibly, causing misalignment or distortion of the cut position.
Priority for Cutting Settings Sets whether to prioritize the cutting settings of the machine or the RIP software.
Ink Empty Mode Sets whether printing should continue or stop if the ink runs out during printing.
Notifications On/Off When this is set to on, notifications are displayed at the appropriate times.
  • Ink Mixing Notification*2
  • Middle Pinch Roller Placement Notification
  • Media Clamp Placement Notification
Sound at End of Printing Selects whether to play a sound at the end of printing.
Sleep Time Sets the time until sleep mode (the state in which the power-saving features operate) activates.
Stopping the Warning Beep

Sets the duration of the warning beep that sounds when, for example, an error occurs.
Reset to Factory Defaults Returns all settings other than Language and Units, including registered media, to their factory default values.
System Information Machine Information Displays the Model, Serial Number, Ink Type, Firmware Version, and MAC Address.
Network Sets the Obtain IP Address Automatically, IP Address, Subnet Mask, and Default Gateway to connect the machine to a computer.
Units Sets the length and temperature units.
Language Sets the language.
Date/Time Sets the current year, month, day, hour, minute, and second.
Appearance Selects the color scheme of the operation panel's screen.
Screen Brightness Sets the brightness of the operation panel's screen.
Screen Operation Sound Turns the operation sound of the operation panel on/off.
2D Codes User's Manual Displays the 2D code for viewing the manual using a smartphone or other mobile terminal.
Roland DG Connect Displays the 2D code for accessing Roland DG Connect using a smartphone or other mobile terminal.
License Displays the software license information.
*1 This setting only appears when media has been set up.
*2 This menu item is only displayed on machines when the ink type includes white ink.