3. Configure settings to match the media.

To ensure the optimal output according to the media size and type, set the minimal amount of items. All items set here can be set individually as well.

Procedure
  1. On the Select Media Output Type screen, select the output type and tap Next.
    • Print Only/Print & Cut

      Proceed to step 2.

    • Cut Only

      Switch to the Multi Sensor Adjustment screen. When automatic adjustment is finished, tap OK. This completes the settings for Cut Only.

  2. On the Heater Temperature screen, adjust the Print Heater and Dryer temperatures.
    • If this is not necessary, tap Next.
    • Follow the procedure below to make changes.
      1. Tap AP-640_Panel_Icon_MINUS or AP-640_Panel_Icon_PLUS to set the Print Heater or Dryer temperature.
      2. Tap Next.
  3. Use the Print Head Height screen to adjust the print head height.
    • If this is not necessary, tap Next.
    • Follow the procedure below to make adjustments.
      1. Tap Change
      2. Open the front cover.
      3. Move the height-adjustment lever to adjust the head height.
      4. Close the front cover.
      5. Tap OK.
      6. Tap Next.
      For details on this work, refer to Changing the Print Head Height.
  4. On the Nozzle Drop-out Test screen, configure the Printing Test and Output Start Location settings.
    • If this is not necessary, tap Next.
    • To perform a Printing Test, tap Printing Test - Execute. For details on what to do after the printing test, refer to Step 2: Normal Cleaning Method.
  5. On the Select Media Adjustment Method screen, select the adjustment method.
    Here, the media feed correction for reducing horizontal bands and the correction of the landing position of the ink will be adjusted.
    MEMO Simple Correction (Auto) is the recommended adjustment. You can determine the correction values with Detailed Correction (Manual).
This completes the setup of the media.