Checking before Output

LAN (Local Area Network) Settings

Check that you can perform communication through the LAN (Local Area Network).

The LAN is enabled if the status LED () on the LAN connector located on the side of the printer is lit in green.

VG3_LAN

Activity LED This flashes orange while data is being received from the network.
Status LED This indicates the status of the communication function. When it lights in green, communication is possible.

Preventing Sedimentation in Inks

The precipitation of the ingredients in the ink disables printing in normal color. To mix the ingredients in the ink well, remove the pouch tray, shake it 50 times (for approximately 20 seconds), and then reinsert it.



Shake the pouch trays:
  • White ink: Each day (before starting the day's operations).
  • Ink other than white ink: Once per week.
MEMO

To prevent ink precipitation, you can make the machine periodically display a message prompting you to mix the ink.

Showing/Hiding Notifications
IMPORTANT
  • The ingredients in white ink tend to settle. Allowing the ink to stand without shaking it can cause the settled material to harden, resulting in malfunction or other problems.

  • Do not remove the ink pouches. Shake the entire pouch tray. Removing the ink pouches may lead to the ink leaking.

  • Before shaking, wipe off any ink from around the mouth of the ink pouch. If you do not wipe off the ink, it may splatter when you shake the pouch tray.

  • When you have finished mixing the ink, reinsert the pouch tray immediately. Taking time to reinsert the pouch tray will adversely affect the ink path.