Cleaning Error (Drain Bottle)

This message appears when one of the following situations is detected.

  • The drain bottle was removed while Ink Renewal Inside Damper was in progress.
  • The drain bottle became full while Ink Renewal Inside Damper was in progress.
  • The drain bottle is removed during initial ink filling.
  • The drain bottle became full during the first ink fill.
Operation cannot be continued. Perform the following operations.
  1. Discard the discharged fluid and correctly attach the drain bottle.
  2. Check that the ink cartridges are inserted and that there is sufficient ink.
  3. Switch the sub power off and back on.
  4. Perform Ink Renewal Inside Damper or fill the machine with ink.
    MEMO

    If the printer stopped partway through Ink Renewal Inside Damper, perform Ink Renewal for Group A, and then perform Ink Renewal Inside Damper again.

If an Ink Cartridge Error appears during work, remove and reinsert the corresponding ink cartridge.