Cleaning Error (Drain Bottle)

This message appears when the amount of waste liquid exceeds the specified limit during Light Choke Cleaning or the first ink filling procedure for the machine, or when the drain bottle is removed.

Operation cannot be continued.

For Light Choke Cleaning, perform the following.
  1. Discard the discharged fluid in the drain bottle, and then attach this bottle again.
  2. Check that the ink cartridges are inserted and that there is sufficient ink.
  3. Switch the sub power off and back on.
  4. Perform Ink Renewal.
  5. Perform Light Choke Cleaning.

When performing ink filling for the first time, attach the drain bottle, switch the sub power off and then back on, and then restart the ink filling procedure.