Cleaning Error (Ink Cartridge)

This message appears in the following situations:
  • An ink cartridge is pulled out or becomes empty during Light Choke Cleaning.
  • A cartridge is pulled out during the initial ink filling.

Operation cannot be continued.

For Light Choke Cleaning, perform the following.
  1. Check that the ink cartridges are inserted and that there is sufficient ink. Replace any empty ink cartridges.
  2. Switch the sub power off and back on.
  3. Perform Ink Renewal.
  4. Perform Light Choke Cleaning.

When performing ink filling for the first time, install the cartridge, switch the sub power off and then back on, and then restart the ink filling procedure.