Insufficient Media Width

The print data is larger than the media width. Continue output?

This message appears when the size of the printing data is larger than the printing area of the loaded media.

To continue performing output without making corrections, tap Continue Output. At this time, the portion extending beyond the printing area is not output.

To cancel output, tap Cancel. Make the printing area wider, for example, by replacing the media with a wider piece of media, and then send the data again.

MEMO There is no limitation on the size of the data in the media-feed (FEED) direction.
Crop marks cannot be added because the print data is larger than the media width. Continue output?

The printing area is not large enough for print data with crop marks. This message also appears when the print data width is 60 mm (2.36 in.) or less.

To continue performing output without making corrections, tap Continue Output. At this time, the data is output without printing the crop marks.

To cancel output, tap Cancel. Replace the media with a wider one. Alternatively, change the print data width to 60 mm (2.37 in.) or more, and then send the data again.