Motor Error

This message appears when an error such as the motor being under load occurs.

Operation cannot be continued. First, turn off the sub power. Next, eliminate the cause of the error, then immediately switch on the sub power.

If the machine is allowed to stand with the error uncorrected, the print heads may dry out and become damaged. This error may be caused by such factors as a media jam, an operation that pulls the media with excessive force, or the media not being loaded correctly.

  • If a media jam occurs

    Carefully remove the jammed media. The print heads may also be damaged. Perform cleaning, and then perform a printing test and check the results.

  • If the media is pulled with excessive force

    Raise the loading lever and adjust the media to create a small amount of slack, and then switch on the sub power.