Replacing the Cleaning Liquid Pouch

WARNING

Never store ink, cleaning liquid, or discharged fluid in any of the following locations.

  • Any location exposed to open flame
  • Any location where high temperature may occur
  • Near bleach or any other such oxidizing agent or explosive material
  • Any location within the reach of children

Fire may be a danger. Accidental ingestion by children may pose a health hazard.

IMPORTANT
Precautions regarding cleaning liquid pouch replacement
  • Never insert or remove the cleaning liquid cartridge with undue force. Cleaning liquid may leak.
  • If the cover of the cleaning liquid cartridge does not lock securely, the cleaning liquid cartridge needs to be replaced.

    For information about purchasing cleaning liquid cartridges, contact your authorized dealer or visit our website (https://www.rolanddg.com/).

Procedure
  1. Pull out the cleaning liquid cartridge from the machine.

    RemoveCleaningLiqu
  2. Remove the cover of the cleaning liquid cartridge.
    1. Keep the side with the arrow mark face up.
    2. Remove the cover by sliding it in the direction indicated by the arrow.

      DisassembleCartrige
  3. Remove the used cleaning liquid pouch from the cartridge case.

    RemoveInkPouch
  4. Load a new cleaning liquid pouch in the cartridge case.
    MEMO

    Pass the protrusions (A) on the cartridge case through the holes (B) on the cleaning liquid pouch to load it in the correct position.


    InsCleaningPouch
  5. Attach the cover to the cartridge case.
    1. Insert the protrusions (A) at the back of the cover into the holes in the cartridge case.

      Hook_CoverINK
    2. Push the cover to fit its hooks into the holes in the cartridge case.
      There are hooks in six locations. Check that all the hooks are seated in the holes and that the cover does not come loose from the cartridge case.

      Press_CoverINK
  6. Insert the cleaning liquid cartridge into the cleaning liquid cartridge slot.
    Orient the cartridge so its protrusion (A) is face up, and then, while keeping the cartridge level, insert the cartridge as far as it will go.

    CleaningLiqu
  7. Tap Yes when the cleaning liquid pouch replacement confirmation screen appears.

    If you tap Yes to reset the amount of cleaning liquid remaining, the cleaning liquid pouch will be identified as a new product.

    MEMO

    If you tap Yes on the cleaning liquid pouch replacement confirmation screen even though you have not replaced the cleaning liquid pouch, the amount of cleaning liquid remaining is reset. In this situation, no notification will appear even if the amount of cleaning liquid remaining is very small, and the message Replace the cleaning liquid pouch. will appear when the cleaning liquid runs out. To ensure you have enough time to prepare the replacement cleaning liquid, tap No if you have not replaced the cleaning liquid.