1. Adjusting the Misalignment of the Ink Landing Position

Procedure

Set up the media to print and cut or to cut with crop marks.
Tap .
Tap Media Settings - Printing Settings - Media Gap Adjustment.
Select Simple Correction (Auto) and tap Next.
Tap Execute.
The test pattern is printed and the media gap is adjusted automatically.
Tap OK when the completion screen appears.
Perform the operations shown below according to the Result.
- If Successful is displayed on the operation panel, tap .
- If Failed is displayed on the operation panel, perform the procedure under Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjustment).

Feedback