Checking the Settings of Registered Media

Follow the procedure below to check the settings of registered media. After checking these settings, to change them, refer to Changing the Settings of Registered Media.

Procedure
  1. Tap Panel_Icon_Menu.
  2. Tap Media Management.
    The registered media are displayed in a list.
  3. Tap a media setting.
  4. Tap List of Media Settings.
    The registered media setting values are displayed in a list.
    Menu itemReference page
    Print Head HeightChanging the Print Head Height
    Feed CorrectionManual Adjustment: Reducing Horizontal Bands (Feed Correction)
    Media Gap AdjustmentManual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjustment)
    Blade AdjustmentFine-tuning the Cutting Conditions
    Print & Cut Position AdjustmentCorrecting the Misalignment of Printing and Cutting
    Crop Cut Position AdjustmentCorrecting the Misalignment of Printing and Cutting with Crop Marks (Concurrent Test for Printing and Cutting with Crop Marks)Correcting the Misalignment of Printing and Cutting with Crop Marks (Separate Test for Printing and Cutting with Crop Marks)
    Over CutCutting to Make It Possible to Cut Corners Attractively (Over Cut)
    Heater TemperatureSetting the Front Heater Temperature
    Multi Sensor AdjustmentCorrecting the Reading Sensor
    Media Suction ForceUsing Media That Wrinkles Easily/Does Not Move Smoothly
    Printing Movement RangeReducing the Output Time for Narrow Media
    Middle Pinch Auto Raise/LowerUse Middle Pinch Rollers When Pulling Back or Feeding Media
    Media Sticking PreventionUsing Sticky Media
  5. Tap Panel_Icon_Home.
    You are returned to the home screen.