1. Select the Ink Type

Procedure
  1. Press [▲] or [▼] to select the ink type, and then press [ENTER].
    Table 1.
    Ink type Cyan (C)

    Magenta (M)

    Yellow (Y)

    Black (K)

    		 Gloss (Gl) White (W) Primer (Pr) Red (Re) Orange (Or)
    EUV5 4 COLOR ✓ － － － － －
    EUV5 GlGlWW ✓ ✓ ✓ － － －
    EUV5 PrGlWW ✓ ✓ ✓ ✓ － －
    EUV5 ReOrWW ✓ － ✓ － ✓ ✓
    EUV5 ReOrGlW ✓ ✓ ✓ － ✓ ✓
    EUV5 ReOrPrW ✓ － ✓ ✓ ✓ ✓
    EUV5 RePrGlW ✓ ✓ ✓ ✓ ✓ －
  2. Press [◀] or [▶] to select [YES], and then press [ENTER].
    MENU_EUV5
    * Check the selected ink type. If the ink type is incorrect, select [NO], and then press [ENTER] to start again from step 1.
  3. Make sure the drain bottle is installed.
  4. Press [ENTER] to confirm your entry.