Step 3: Installing the Media Holders

Procedure
  1. Place the two shafts on the arms.
    Place the shaft on the stand
  2. Pass the rear shaft through the two media stays.


  3. Attach the left media holder.
    1. Pass the front shaft through the left media holder.
    2. Catch the left media holder on the rear shaft.


  4. Attach the right media holder in the same manner.
  5. Raise the levers (A) to secure the left and right media holders.
    Position the media holders approximately 100 mm (3.94 in.) from the edges.


  6. Attach the shaft clamps, securing the shafts with two bolts.
    IMPORTANT Ensure the media holders do not get caught in the shaft clamps.