Jump to index list
  • A
    • Amount of ink remaining[1]
  • B
  • C
    • Cancel Output[1]
    • Cancel Setup[1]
    • Caps[1]
    • Cartridge slots[1]
    • Cleaning[1]
    • Cleaning liquid slot[1]
    • Cleaning liquid will soon run out[1]
    • Conditions for object to be printed on[1]
  • D
  • E
    • Emergency stop device[1]
    • Ethernet connector[1]
  • F
    • Feed correction[1]
    • Firmware version[1]
    • Flushing sponge[1]
    • Front cover[1]
  • H
  • I
    • Indicator light[1]
    • Initialization[1]
    • Ink circulation[1]
    • Ink Circulation Interval[1]
    • Ink Expiration Date Notification[1]
    • Ink Mixing Notification[1]
    • Ink renewal[1]
    • Ink Renewal Inside Damper[1]
    • Ink replacement method[1]
    • INK SHELF LIFE[1]
    • Ink Type[1]
    • Install the cleaning liquid pouch.[1]
    • IP address[1]
  • L
  • M
    • MAC address[1]
    • Machine information[1]
    • Main power switch[1]
    • Manual cleaning[1]
    • Media Gap Adjustment[1]
    • Media information[1]
    • Medium cleaning[1]
    • Menu[1]
    • Model[1]
    • Move[1]
  • N
    • Network[1]
    • Normal cleaning[1][2]
    • Notifications[1]
    • Notifications On/Off[1]
    • Nozzle Drop-out Test[1]
    • Nozzle mask[1]
    • Nozzle Mask Test[1]
  • O
    • Objects that can be printed on[1]
    • Objects that cannot be printed on[1]
    • Obtain IP Address Automatically[1]
    • Operation panel[1][2]
    • Origin[1]
  • P
    • Pausing[1]
    • Periodic maintenance frequency[1]
    • Power-cord connector[1]
    • Power distribution board[1][2]
    • Powerful cleaning[1][2]
    • Power rating label[1]
    • Print head cap[1]
    • Print-head carriage[1]
    • Print Head Height[1][2]
    • Printing[1][2]
    • Printing height[1]
    • Printing Movement Range[1]
    • Printing position[1]
    • Printing-start location[1]
    • Print origin[1]
    • Print start point[1]
    • Print surface height[1]
    • Product specifications[1]
  • R
    • Replace the cleaning liquid pouch.[1]
    • Resuming[1]
    • Returning settings to factory defaults[1]
    • Right cover[1]
  • S
  • T
    • Table control panel[1]
    • Temperature[1]
    • TEST PRINT POS[1]
    • There is ink that has expired.[1]
    • The time for flushing sponge replacement has arrived.[1]
    • Time[1]
    • TIME TO CL.[1]
    • Touch panel[1]
    • Transporter[1]
    • Turning the power off[1]
    • Turning the power on[1]
  • U
  • W
    • When output, cleaning, and other operations are completed, discard the discharged fluid.[1]
    • Wiper[1][2][3]
    • Wiper cleaner[1]
    • Workflow[1]