Sleep Mode (Power-saving Feature)

Printer unit

The printer unit switches to a low-power "sleep mode" when a fixed interval passes with no operation. The factory default for the time after which the machine switches to sleep mode is 30 minutes. The operation panel turns off when the machine enters sleep mode. Using the operation panel or performing operations such as sending print data from the computer restores the machine to its normal mode.

This sleep mode setting can be changed. However, we recommend setting the activation time for sleep mode to 30 minutes or less to reduce power consumption.Setting the Activation Interval for Sleep Mode (Power-saving Feature)

Transporter

If 30 minutes pass without any printing after the vacuum pump is activated, the vacuum pump is stopped to reduce power consumption. To activate the vacuum pump again, carry out the same vacuum operations as when setting up the object.