Making Fine Adjustments and Printing a Preset

You can change part of a preset and then perform printing. For instance, you can just change the height of the object to be printed on and the print area without changing the other settings.
Procedure
  1. Press [MENU].
  2. Press [▶], then [▼][▶] to display the screen shown below.


  3. Select the preset that you want to load.
    Select one of the 40 types of presets (when no names have been assigned, select from NAME1 to NAME40) or DEFAULT (DEFAULT is the factory defaults for each setting).
    1. Press [▲] or [▼] to select the name of the preset you want to load.
    2. Press [ENTER] to confirm your entry.


      Setup is canceled and [SETUP] turns off. The selected preset name is displayed on the lower right side of the screen.
  4. Attach the object to be printed on.
  5. Press [SETUP].
    The loaded preset setting is displayed.


  6. Change the necessary settings, such as height and print area.
  7. Perform printing.