Minimizing Print Head Movement

The print time is reduced by restricting the operating range of the print heads. This feature is effective when the print area or print data has a small width.
Procedure
  1. Press [MENU].
  2. Press [▼] several times to display the screen shown below.


  3. Press [▶].
  4. Press [▼] several times to display the screen shown below.


  5. Press [▶].


  6. Press [▲] or [▼] to select an item.
    FULL WIDTH S Explanation
    "PRTAREA" "PRTAREA" adjusts the operating range of the print heads to the preset print area.
    "OFF" "OFF" matches the range of print heads movement to the print data. Movement is limited to the minimum amount necessary, and this can be expected to yield the fastest printing. When this feature is used, the time needed for the ink to harden is not constant, and an uneven color may result.
    "FULL"(Default settings) "FULL" makes the speed of the movement of the object to be printed on constant at all times and produces the most stable printing results.
  7. Press [ENTER] to confirm your entry.
  8. Press [MENU], then [◀] to go back to the original screen.
    MEMO:

    For print data whose width gradually narrows (e.g., an inverted triangle), even if "FULL WIDTH S" is set to "OFF", the movement of the print heads may not match the print data. This is to prevent ink-curing failures caused by the print position and is not a malfunction.