7. Limit the print heads used for printing.

Procedure
  1. Check for the nozzle group with dot drop-out or dot displacement by viewing the results of the printing test.
    "1" or "2" is the nozzle group. The following shows a dot drop-out in nozzle group 2.


    MEMO: If the printing-test results are difficult to interpret

    Examine the results from different angles in a well-lit location. They are visible using the reflection of the light.

  2. Start VersaWorks.
  3. Click [Printer] - [Printer Settings].
    The [Printer Settings] dialog box appears.
  4. From the [Printer List], select the printer whose print heads will be limited.
  5. Click [Advanced].
    The [Advanced] dialog box appears.
  6. Select the print heads to use in printing from the printing-test results.


  7. Click [OK].
    Close the [Advanced] dialog box.
  8. Click [OK].
  9. Close the [Printer Settings] dialog box.
  10. The icon is displayed on top of the image of the printer whose setting has been changed.