Margins and the Distance between Crop Marks
Set the margins and the distance between crop marks. Take into account the margin necessary for cutting the material and set the crop mark position.
Printing Area with Crop Marks (When Creating Cutting Data Using Designer)
MEMO Ensure that the area where the crop marks are positioned is free of any illustrations or dirt other than the crop marks.
| Printable range | |
| A | 500 mm (19.68 in.) or less |
| B | 610 mm or less |
| C | 10 to 60 mm (0.40 to 2.36 in.) *1 |
| D | 10 to 42.5 mm (0.40 to 1.67 in.) |
| E | Trailing margin after crop mark: 50 mm (1.97 in.) or more |
| F | Leading margin before crop mark: 20 mm (0.79 in.) |
*1 Set the crop mark positions manually. Note the following points when using material in sizes other than A3, A4, or B4.
- When using a pinch roller within the leftmost grit pattern, make sure to leave at least 30 mm (1.19 in.) (W) from the left end of the grit pattern to the crop mark. If the cleared distance is less than 30 mm (1.19 in.), the crop mark cannot be read.
