Specifications

Drive system Digital control servo motor
Cutting mechanism Friction feed
Acceptable material size Width 50 to 700 mm (1.97 to 27.55 in.)
Length

Roll material: No restriction

Flat material: 100 mm (3.94 in.) or more
Maximum cutting area 584 (W) × 25,000 (L) mm (22.99 [W] × 984.25 [L] in.)
Usable tools
  • Roland CAMM-1 series blade (ZEC-U5032/U5022/U5025/U3017)
  • Flatbed blade (ZEC-U1715/U3050/U3075/U3100)
  • Car film dedicated blade (ZEC-U5010)
Cutting speed 10 to 850 mm/s (0.4 to 33.46 in./s) (all directions)
Blade force setting range 30 to 500 gf
Mechanical resolution 0.0125 mm/step
Software resolution 0.025 mm/step (0.98 mil/step)
Distance accuracy *1 Error of less than ±0.2% of distance traveled, or 0.1 mm (3.94 mil), whichever is greater
Repetition accuracy*1*2 0.1 mm (3.9 mil) or less
Alignment accuracy for printing and cutting when printed material is loaded*1 *3 1 mm (39.37 mil) or less for movement distance of 210 mm (8.26 in.) or less in material-feed direction and movement distance of 170 mm (6.69 in.) or less in width direction (Does not take influence of printer and material into account)
Connectivity
  • Ethernet (10BASE-T/100BASE-TX, automatic switching)
  • USB (USB 2.0 FULL SPEED compliant)
Replot memory 2 MB
Command system CAMM-GLIII
Power supply Dedicated AC adapter

Input: 100 to 240 VAC, 50/60 Hz

Output: 24 VDC 2.7 A
Rated current 1.0 A
Power consumption 24 W
Acoustic noise level During operation 70 dB (A) or less
During standby 40 dB (A) or less
Outer dimensions 860 (W) × 319 (D) × 235 (H) mm (33.86 [W] × 12.56 [D] × 9.25 [H] in.)
Weight 13.5 kg (29.76 lb.)
Environment
  • Temperature: 5 to 40°C (41 to 104°F)
  • Humidity: 20 to 80%RH (no condensation)
Included items

Power cord, AC adapter, blade, blade holder, roller base, USB cable, alignment tool, manuals
*1 According to material and cutting conditions as specified by Roland DG Corporation (using separately available stand PNS-24).
*2
  • Excluding expansion/contraction of the media
  • Provided that the media feed length is 1,600 mm (62.99 in.) or less
*3 According to measurement standards as specified by Roland DG Corporation.
  • Software must be included Roland DG Corporation software.
  • Assumes use of a laser or inkjet printer with a resolution of 720 dpi or greater.
  • Excludes glossy and/or laminated material.
  • Excludes effects of warped printing due to accuracy of printer or effects of expansion/contraction of material.
  • May not be read correctly by the sensor depending on the printer ink (black) used.